The wide range of products presented by two 4-channel AB class amplifiers with the nominal power of 50 Watts up to 80 Watts @ 4 Ohm per channel. These amplifiers can give up to 300 Watts in bridged connection mode, providing their wide usage in audio systems buildup. Frequency cut off up to 6 kHz and simultaneous operation of HPF and LPF provides per-channel filtration without need of active crossover usage.
This product is no longer in stock
Warning: Last items in stock!
|Frequency Response||10-20000 Hz|
|Number of the channels||4|
|2 Ohm RMS Power (14.4 V)||90 W|
|4 Ohm RMS Power (14.4 V)||50 W|
|Minimum permissible load on the channel||2 Ohm|
|Minimum permissible load in a bridge connection||4 Ohm|
|Input SPL||6-0.2 V|
|High Pass Filter||20-6000 Hz|
|Low Pass Filter||50-500 Hz|
|Input Terminal||4 Ga|
|Output Terminal||8 Ga|
|LPF and HPF Simultaneous Operation||Yes|
|Working Voltage||9-15 V|
|Dimensions (L x W x H)||290x165x57 mm|
Amplifier – 1 pcs.
Owner's Manual – 1 pcs.
Warranty card – 1 pcs.
Mounting Kit – 1 pcs.